Mor Park ,

to construct house, garage, effluent treatment plant and percolation area. Gross floor space of proposed works: 385 sqm (House - 306 sqm, Garage - 58 sqm)

Moor ,

for wind turbine test site comprising of the following.:- 1. No. 12m high turbine tower with adjacent 12m high wind measuring mast and 1. No. 20m high turbine tower with adjacent 20m high wind measurement mast and all associated services

Moor ,

to extend wind turbine test site to rear of factory premises to include; 1) 11 No 20-30Kw wind turbines 31m height to tip of propeller. 2) All other ancillary site works. The development is covered by the provisions of the Renewable Energy Directive III (Directive (EU) 2023/2413)

Moor , Athenry , Co. Galway

to extend wind turbine testing & research site to rear of existing factory (previously granted under planning permission ref. number 13/1242) to include the following: 24 no. 20-30kw wind turbines (maximum height is 30.100 meters), includes 2 no. turbines in upper test site (previously granted under planning permission ref. no. 20/101), all other ancillary site works

Cashla & Moor , Athenry , Co. Galway

of extensions and alterations to factory premises and site and entrances at Cashla, Athenry to include the following: - A. Machine Shop and Canteen to South Elevation. B. Switch Room & Compressor Room to south elevation. C. Maintenance Garage and Stores to East elevation. D. Monitoring Office Building to back of site. E. Steel Cleaning Shop to North elevation. F. Store to south elevation. G. Retention of existing entrance at North Western corner of site as HGV entrance only. (existing entrance on West Boundary to be relocated nearer to car park to be for cars only. -- covered under planning ref. no:- 20/1221. H. Enlargement of site to back of factory

Cashla ,

& retention permission for development at C&F Tooling, Cashla, Athenry, County Galway. Retention planning permission for the following extensions to the existing C&F Tooling premises: • machine shop & canteen (gross floor area - 792m2) • switch room & compressor room (gross floor area - 96 m2) •maintenance garage & stores gross floor area - 673 m2) • monitoring office building (gross floor area - 444 m2) • steel cleaning shop (gross floor area - 62.3 m2) • store (gross floor area - 20.3 m2) • machine shop (gross floor area - 4,065 m2). In addition to the above, retention permission for the existing component storage area (external) (approx. 1.54 Ha in area). Planning permission for: • upgraded surface water drainage system & associated works, •relocation of existing traffic barrier at the existing vehicular entrance to the premises, • new vehicular staff entrance on the western boundary of the site, & • alterations to the existing staff car park to provide 357no. car parking spaces to include the provision of EV charging & accessible car parking bays, • provision of visitor car park to provide 31no. car parking spaces (including EV charging & accessible car parking bays). The proposed development includes for all associated site development works & landscaping

Cashla , Athenry , Co. Galway

and completion of extension to Industrial Premises. Gross floor space of work to be retained: 3980.00 sqm

Cashla ,

of existing agricultural shed including access and all associated works and services. Gross floor space of work to be retained: 59 sqm

Pollagooil , Athenry , Co Galway

of attic conversion to existing bungalow dwelling & construction of a detached garage

Pollagooil , Athenry , Co. Galway

for an existing granny flat. Gross floor space of work to be retained: 75 sqm

Ballyhugh ,