Ballydine , Kilsheelan , Clonmel

(i) change the design of the proposed dwelling and location of the proposed dwelling within the site as granted under Planning Reference Number 18601236 and (ii) change the use of the existing fire damaged dwelling to a domestic garage and carry out all necessary repair works to same to enable its use as a domestic garage and all associated site development works

Ballydine , Kilsheelan , Clonmel

an existing wheelwash, weighbridge, office and hardcore area for an indefinite period

Ballydine , Kilsheelan , Clonmel

replacement of approximately 100 m of existing 2.4 m high chain link perimeter fencing, including associated access/emergency gates with new 2.4 m green palisade security fencing/gates and all associated site works

Merck Sharpe and Dohme AGI , Ballydine , Kilsheelan

the replacement of approximately 100m of existing 2.4m high chainlink perimeter fencing, including associated access/emergency gates with new 2.4 m green palisade security fencing/gates and all associated site works. The application refers to a development on a site that carries out an activity for which an Industrial Emissions License under Part IV of the Environmental Protection Agency Act 1992 (as amended) is required and where the Major Accident Directive applies

Merck Sharpe and Dohme AGI , Ballydine , Kilsheelan

the replacement of approximately 100m of existing 2.4m high chainlink perimeter fencing, including associated access/emergency gates with new 2.4m green palisade security fencing/gates and all associated site works to an existing above ground natural gas installation. The application refers to a development on a site that carries out an activity for which an Industrial Emissions License under Part IV of the Environmental Protection Agency Act 1992 (as amended) is required and where the Major Accident Directive applies

Merck Sharpe and Dohme AGI , MSD Ballydine Kilsheelan , Clonmel

construction of a proposed three-storey pilot plant manufacturing facility sized approximately 3,266 square metres and approximately 20.75 metres high and located and linked to the existing factory 03 manufacturing building and located south of the O.S.D. manufacturing facility, currently under construction (ref. 20/693). The project development alos includes the following: a) An equipment yard housing plant, equipment and abatement system, vents and equipment housings including a covered waste tank, b) Roof mounted equipment and vents, c) Modifications to existing underground utilities including a surface water attenuation tank, underground storage tanks and miscellaneous works, d) The extension of the temporary contractors’ compound, currently under construction and additional local temporary contractor parking together with a second compound directly adjacent to the proposed facility, e) Revised landscaping and site-works, f) Modifications to the existing internal roads layouts, site lighting, pipe bridges, links, bunded tanks and supporting structures, and a truck staging area, g) Modifications to the existing car park layout to allow for the inclusion of additional accessible car parking spaces and electrical charge points, h) Alterations to the elevations of Factory 03 to accommodate the proposed development. This application consists of a development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act 2003) is required. An Environmental Impact Assessment Report (EIAR) and a Natura Impact Statement (NIS) accompany this planning application. This is a site to which the Chemicals Act (Control of Major Accident Hazards involving dangerous Substances) Regulations 2015 (S.I. 209 of 2015) applies

Ballydine , Kilsheelan , Clonmel

development which will consist of an extension to the existing Research and Development and Formulation Building. The proposed development will comprise a total gross floor area of c.6400 sqm including (i) a new three-storey extension to the northern elevation of the existing Research & Development and Formulation Building, to be developed in two blocks, and to a maximum height of 19.94m (ii) 30 no. new permanent car parking spaces; (iii) a temporary construction compound and contractors parking area to support the development; (iv) all associated site development and ancillary works, including local modifications to internal site roads, footpaths, underground drainage and utility services, realignment of internal fencing, and provision of a new storm water attenuation tank. This application refers to a development on a site that carries out an activity for which an Industrial Emissions licence under Part IV of the Environmental Protection Agency Act 1992 (as amended) is required and where the Major Accident Directive applies

Ballydine , Kilsheelan , Clonmel

an extension to the existing Research and Development and Formulation Building. The proposed development will comprise a total gross floor area of c.6400 sqm including (i) a new three-storey extension to the northern elevation of the existing Research & Development and Formulation Building, to be developed in two blocks, and to a maximum height of 19.94m (ii) 30 no. new permanent car parking spaces; (iii) a temporary construction compound and contractors parking area to support the development; (iv) all associated site development and ancillary works, including local modifications to internal site roads, footpaths, underground drainage and utility services, realignment of internal fencing, and provision of a new storm water attenuation tank. This application refers to a development on a site that carries out an activity for which an Industrial Emissions licence under Part IV of the Environmental Protection Agency Act 1992 (as amended) is required and where the Major Accident Directive applies

Ballydine , Kilsheelan , Clonmel

construction of a proposed three-storey pilot plant manufacturing facility sized approximately 3,266 square metres and approximately 20.75 metres high and located and linked to the existing factory 03 manufacturing building and located south of the O.S.D. manufacturing facility, currently under construction (ref. 20/693). The project development alos includes the following: a) An equipment yard housing plant, equipment and abatement system, vents and equipment housings including a covered waste tank, b) Roof mounted equipment and vents, c) Modifications to existing underground utilities including a surface water attenuation tank, underground storage tanks and miscellaneous works, d) The extension of the temporary contractors’ compound, currently under construction and additional local temporary contractor parking together with a second compound directly adjacent to the proposed facility, e) Revised landscaping and site-works, f) Modifications to the existing internal roads layouts, site lighting, pipe bridges, links, bunded tanks and supporting structures, and a truck staging area, g) Modifications to the existing car park layout to allow for the inclusion of additional accessible car parking spaces and electrical charge points, h) Alterations to the elevations of Factory 03 to accommodate the proposed development. This application consists of a development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act 2003) is required. An Environmental Impact Assessment Report (EIAR) and a Natura Impact Statement ("NIS") accompany this planning application. This is a site to which the Chemicals Act (Control of Major Accident Hazards involving dangerous Substances) Regulations 2015 (S.I. 209 of 2015) applies

Ballydine , Kilsheelan , Clonmel

the construction of a 2 storey dwelling house, with carport and domestic garage attached, installation of a waste water treatment system and all associated site works

Ballydine , Kilsheelan , Clonmel